You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

Reply
 
Thread Tools Display Modes
Old April 1st, 2020, 07:53 PM   #61
geoffjohnson1
Member
United States

geoffjohnson1 is offline
 
Join Date: Mar 2015
Location: Illinois
Posts: 1
Count me in

My name is Geoff and I am in the Champaign/Danville, Illinois area. I will offer whatever help I can on my days off with Allen Bradley PLC5, SLC500, Micrologix, Controllogix, Compactlogix, Guardlogix and HMI and some Omron. I have access to software for most Rockwell hardware and for late model Omron. I have extensive troubleshooting knowledge with relay logic as well. I can be reached at geoffjohnson1 at comcast dot net or through this message board. If you have a need reach out to me and I will let you know if I think it is something I can help with.
  Reply With Quote
Old April 1st, 2020, 08:11 PM   #62
plcisgreat
Member
United States

plcisgreat is offline
 
Join Date: May 2005
Location: Norfolk,NE
Posts: 53
Machine Assembly,Programmer, and Maintenance Planner

All,
I'm located in the northeast part of Nebraska. 10 years of experience with AB, Siemens, Wago, and Red Lion HMI. If you need help with scheduling, I have experience with Maximo, CMMS. Can work remotely or offer assistance by phone. Direct line. 402-844-7652 or glammers@northeast.edu.
Be safe.
Glen
  Reply With Quote
Old April 1st, 2020, 09:29 PM   #63
a062549
Lifetime Supporting Member
China

a062549 is offline
 
Join Date: Feb 2012
Location: Home
Posts: 131
SW Oklahoma lots of experience with Allen-Bradley, Red Lion and IDEC.
Happy to travel, if we can get to you via car.
PM me!
  Reply With Quote
Old April 1st, 2020, 10:21 PM   #64
Bullzi
Lifetime Supporting Member
United States

Bullzi is offline
 
Join Date: Jun 2012
Location: Colorado
Posts: 1,450
I'm in. In Colorado but travel to surrounding states quite often. I have experience and software for Allen Bradley, GE, ScadaPack, Siemens and Automation Direct. HMI's FTV ME & SE, Red Lion and Automation Direct.


PM me if I can help you out.
__________________
There is never enough money to do it right but there is always enough money to do it again.
  Reply With Quote
Old April 1st, 2020, 11:44 PM   #65
highvoltage8471
Member
United States

highvoltage8471 is offline
 
highvoltage8471's Avatar
 
Join Date: Feb 2004
Posts: 84
Automation Controls Engineer

I am available to help where ever I can. I have AB software and some hardware. Contact me at highvoltage8471@yahoo.com
  Reply With Quote
Old April 2nd, 2020, 03:54 AM   #66
okoye
Member
Nigeria

okoye is offline
 
Join Date: Jan 2010
Location: lagos
Posts: 23
Nigeria

okoye is online now

Join Date: Jan 2010
Location: lagos
Posts: 23
I am available for help.
I have automation expertise in Misubishi and Delta, Omron PLCs and their associated auxiliaries.
I am am in far away Lagos, Nigeria. You can send direct email: phillipslives1@gmail.com or PM
  Reply With Quote
Old April 2nd, 2020, 03:55 AM   #67
sebastianp
Lifetime Supporting Member
Canada

sebastianp is offline
 
Join Date: Mar 2008
Location: Etobicoke
Posts: 21
Controls Integrator

Available for remote type.

Experience with Ignition ( Gold Certified ) and Rockwell Automation ( Former RASI , RsLogix 5/500/5K, RSView, FactoryTalkView, CCW )

Working knowledge Siemens ( Step7, WinCC, TIA ), Automation Direct.

Decent amount of time available.

PM or email office at allnetauto dot ca

Cheers all
  Reply With Quote
Old April 2nd, 2020, 04:23 AM   #68
russg
Member
United Kingdom

russg is offline
 
Join Date: Aug 2012
Location: York
Posts: 221
I'm experienced in Siemens S5, S7 and TIA. Also have some Robot, Servo drive and vision experience. Other PLC's I've worked on are Omron, GE, and Rockwell, but happy to work with any as long as I can get the software.

Will help remotely or locally if I can. I'm based in the north of England near Leeds.

I've worked for machine builders and SCADA software companies. SCADA wise, I've used mainly Wonderware and GE iFix.

I'm currently working for a drinks factory. But may be able to negotiate something if the assistance was to help the fight against the virus.

Last edited by russg; April 2nd, 2020 at 04:27 AM.
  Reply With Quote
Old April 2nd, 2020, 08:02 AM   #69
crazyc
Member
Canada

crazyc is offline
 
Join Date: Jan 2014
Location: canada
Posts: 1
I am located in Barrie Ontario Canada and have Rockwell expertise -45 years of it can help in any way needed.

jpollard at tsuonline dot com will find me.. or PM here .. Thx Phil for this.. cheers all
  Reply With Quote
Old April 2nd, 2020, 10:23 AM   #70
5618
Member
United States

5618 is offline
 
5618's Avatar
 
Join Date: Oct 2017
Location: York, PA
Posts: 120
York, PA
Background - Electronics degree, industrial electrician / mechanic
Controls programming since 5TI and GE Series One
Controls tech now, primary PLC experience is Allen Bradley and InTouch
Secondary experience with Siemens, Automation Direct, and Omron
Blessed to still be working but can call, email, video chat, remote, possibly visit, etc...
  Reply With Quote
Old April 2nd, 2020, 10:25 AM   #71
LMBrian
Member
United States

LMBrian is offline
 
Join Date: Sep 2012
Location: Florida
Posts: 41
Located in Central Florida. I can help with AB, Automation Direct, GE and Siemens.

Currently working with a 'Critical Manufacturer' but can donate some time if needed.
  Reply With Quote
Old April 2nd, 2020, 02:33 PM   #72
Oceansoul
Member
United Kingdom

Oceansoul is offline
 
Join Date: Apr 2010
Location: England
Posts: 279
I can help/assist with AB Rockwell. Have all the softwares 5,500,5000 etc can help remotely, or in the west London/Surrey area.
  Reply With Quote
Old April 2nd, 2020, 03:22 PM   #73
peter764
Member
United States

peter764 is offline
 
Join Date: Oct 2008
Location: Maine
Posts: 34
I can assist in Maine. Have all AB Rockwell software needed.
Very versed in computers and instrumentation as well as electronics.
  Reply With Quote
Old April 2nd, 2020, 08:07 PM   #74
INTEGRATION NINJA
Member
Canada

INTEGRATION NINJA is offline
 
Join Date: Apr 2020
Location: London
Posts: 1
I can help!

I am available to help fight COVID-19.

I work full time as a systems integrator. I have a PLC and HMI development experience.

My hours are flexible and I work from home so there is no locked in parameters to when I am available.

Southern Ontario Canada

EXPERIENCE:
OMRON CX Programmer - HAVE SOFTWARE
OMRON Sysmac Studio- HAVE SOFTWARE
Rockwell PLC's and HMI's
Mitsubishi PLC and HMI's
Wonderware Archestra
Ignition
AutoCAD - HAVE SOFTWARE

Last edited by INTEGRATION NINJA; April 2nd, 2020 at 08:08 PM. Reason: Typo
  Reply With Quote
Old April 2nd, 2020, 10:02 PM   #75
bwiring
Member
United States

bwiring is offline
 
Join Date: Nov 2005
Location: mpls. mn.
Posts: 66
PLC help

I am also willing to help wherever I can. I'm located in the Minneapolis area. Allen Bradley, Automation Direct, some GE.
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
Disruption in the Automation World, and a practical PLC Code Generator to get started EdStevens LIVE PLC Questions And Answers 80 March 26th, 2017 09:40 AM


All times are GMT -4. The time now is 06:48 PM.


.