click plc simulator

lesmar96

Lifetime Supporting Member
L
Join Date
May 2017
Location
PA
Posts
520
First time checking out the Click PLC from Automation Direct.

I haven't been able to find a simulator in the software. Is that correct or am I missing something?
 

Similar Topics

N
How do I loop an instruction set XX number of times using Click PLC?
Complete noob here, using a Click C0-02DD1-D to run a test stand. Requirement is to turn on motor run for X seconds, turn off and dwell for X...
Replies
6
Views
1,067
drbitboy
drbitboy
J
click plc - panelview c300
merry christmas and happy new year i have a click c0-00dr-d and allen bradley 2711c-t3m. can the panelview talk to the click plc via modbus...
Replies
1
Views
211
mikeexplorer
M
J
Click PLC PWM Output
Hi guys, i have never had to do a PWM Output or input before i have a Device that to dimm the lamp output from the ballast, the ballast has a 24V...
Replies
6
Views
1,020
juddge
J
S
Integrating a Click Plus PLC with Zebra ZT230
I am trying to set a bit to command the Zebra ZT230 to print a label and receive a confirmation bit from the unit via an Automation Direct Click...
Replies
0
Views
663
sharmeyer
S
M
Click PLC doing bit stripping.
Hi All, I have a click plc the I need to bit strip and 16Bit int. This is to get the alarms from these bits in the int. Do anyone know how to bit...
Replies
1
Views
501
OkiePC
OkiePC
Back
Top Bottom