Hi guys,
What would be a good choice for a drive or servo in a master/slave setup controlling two sides of a lift? The issue is that the lift has to go all the way down to the floor and we would not be able to put a jack shaft in to drive the other side.
So we plan on using two lift motors, which each would have an encoder. Suggestions for the encoder choice would be appreciated as well.
Thanks!
John
What would be a good choice for a drive or servo in a master/slave setup controlling two sides of a lift? The issue is that the lift has to go all the way down to the floor and we would not be able to put a jack shaft in to drive the other side.
So we plan on using two lift motors, which each would have an encoder. Suggestions for the encoder choice would be appreciated as well.
Thanks!
John