Uploading project from Maple Systems HMI

Hi Everyone,
Customer has an existing Maple Systems HMI Model HMI5104XH connected to a SCADAPack 350 PLC that I am working on. I was able to upload the SP 350 into Telepace just fine but I am not sure how to upload the project from the HMI.

I don't have the original files and neither does the customer. Any way to upload the file on the HMI and open in the Easy Builder Software?

Thanks for the help!!

Check out technotes 5057 and 5059 on the Maple Systems website. They describe the upload procedures for USB and direct connections.

Thanks that worked perfectly!!