joeboucher
Member
I'm currently attempting to replace the HMI on an existing system with a Red Lion Graphite or G3 HMI. The PLC on the system is a Siemens Simatic TI435 (now sold by Automation Direct as DL405).
Is Red Lion compatible with this PLC? If so, which driver do I use, and what cable do I need? I'm having trouble tracking down the answer, due to the fact that this particular PLC has had a fairly lengthy history, having been sold by so many companies (TI, Siemens, Automation Direct) over the years.
Is Red Lion compatible with this PLC? If so, which driver do I use, and what cable do I need? I'm having trouble tracking down the answer, due to the fact that this particular PLC has had a fairly lengthy history, having been sold by so many companies (TI, Siemens, Automation Direct) over the years.