Micrologix1500

sandy5020

Member
Join Date
May 2012
Location
vadodara
Posts
112
Hi,

I have a Micrologix PLC 1500 on which channel 0 is free. I need to take this PLC in scada via ethernet module any one can suggest a suitable module for this??

currently I have searched and found two modules which are

1761-NET ENI
prosoft -PLX51-DF1-ENI

Which one will be reliable if some one used this please suggest
 

Similar Topics

Hello everyone I have a micrologix1500 connected with RS232 to my computer, and connected to the 1761-net-dni with a series connexion from the...
Replies
4
Views
2,901
Hello Everyone, Let me start out by saying I am definitely not a pro by any stretch of the imagination. What I have is a Micro850 that is on the...
Replies
2
Views
2,658
Okay so I just went into my ML1500 and mistakenly changed a comm setting for channel 0 or 1 channel config section of the programming software...
Replies
2
Views
1,164
Greetings! One of my shop's Micrologix 1500 processor's mode selector switch(soldered on the PCB) has broken off. Currently, it is stuck in RUN...
Replies
2
Views
2,288
Hello everyone, Has ever happen to you this major error? https://imgur.com/YNpueNf This camed after I substitute the old Frequency...
Replies
4
Views
1,808
Back
Top Bottom