Hi everybody,
I'm new to this forum and pretty new to PLC's. I'm familiar with computerprogramming (C++), so the logic part of the PLC isn't to hard to understand. But the whole implementation is new tome.
I recently got a PLC (the TI 410). I was wondering if there was any info on this PLC, since Texas Instruments doesn't support their PLC's anymore.
I read through the Online Tutorial from this page and that helped a lot, but I'd like to have some PLC specific info.
So..., if anyone could help me out, I would be very thankfull.
I'm new to this forum and pretty new to PLC's. I'm familiar with computerprogramming (C++), so the logic part of the PLC isn't to hard to understand. But the whole implementation is new tome.
I recently got a PLC (the TI 410). I was wondering if there was any info on this PLC, since Texas Instruments doesn't support their PLC's anymore.
I read through the Online Tutorial from this page and that helped a lot, but I'd like to have some PLC specific info.
So..., if anyone could help me out, I would be very thankfull.