Hello,
Im starting to program an 1756-L71 with the 1756-IF16 module.
Is the first time that i have to program a plc so im a begginer.
I have to calibrate the channels one at time using the RSLogix 5000 and im confused how to wire it to do this.
So, is the attached file correct? With every i-RTN's and RTN's to GND and INX's to 0 - 10 V.
I know that the LOW reference is 0V and the High reference is 10V with a 0 to 10.25 V source.
Also, i have to use the single-ended current configuration because i need the 16 channels for 4 - 20 mA devices, i have to use the same configuration that i attached but changing the 0 - 10 V source by every device connected or the configuration is different?
Thx.
Im starting to program an 1756-L71 with the 1756-IF16 module.
Is the first time that i have to program a plc so im a begginer.
I have to calibrate the channels one at time using the RSLogix 5000 and im confused how to wire it to do this.
So, is the attached file correct? With every i-RTN's and RTN's to GND and INX's to 0 - 10 V.
I know that the LOW reference is 0V and the High reference is 10V with a 0 to 10.25 V source.
Also, i have to use the single-ended current configuration because i need the 16 channels for 4 - 20 mA devices, i have to use the same configuration that i attached but changing the 0 - 10 V source by every device connected or the configuration is different?
Thx.