ijustdunnoaname
Member
I'm using Ignition 8.0.9 and am having the following issue:
I’m using a UDT with the following members:
Setpoint
SP_HiLimit
SP_LoLimit
Within the UDT, I’d like to set the “EngHigh” property equal to the tag SP_HiLimit and I’d like to set the “EngLow” property equal to the tag SP_LoLimit.value
I’ve tried to do this within the UDT by doing the following:
In the configuration for the member “Setpoint” , I’ve bound “EngHigh” to {SP_HiLimit} and “EngLow” to {SP_LoLimit}. I’ve also tried {SP_HiLimit.value} and {SP_LoLimit.value}. Neither of which worked.
I’ve verified the value for the high limit tag is 450, but when I enter any setpoint over 100, I’m getting an out of range alarm. It doesn’t appear to be recognizing the {tag} as a numeric value.
Any idea what I'm doing wrong?
I’m using a UDT with the following members:
Setpoint
SP_HiLimit
SP_LoLimit
Within the UDT, I’d like to set the “EngHigh” property equal to the tag SP_HiLimit and I’d like to set the “EngLow” property equal to the tag SP_LoLimit.value
I’ve tried to do this within the UDT by doing the following:
In the configuration for the member “Setpoint” , I’ve bound “EngHigh” to {SP_HiLimit} and “EngLow” to {SP_LoLimit}. I’ve also tried {SP_HiLimit.value} and {SP_LoLimit.value}. Neither of which worked.
I’ve verified the value for the high limit tag is 450, but when I enter any setpoint over 100, I’m getting an out of range alarm. It doesn’t appear to be recognizing the {tag} as a numeric value.
Any idea what I'm doing wrong?