Copley Drive control_Reg

haribaburam

Member
H
Join Date
Jun 2011
Location
Coimbatore
Posts
8
Hi ,

We are using copley stepnet TE2-090-07 drive and Omron NX1P2 PLC. We have to control the drive using the EtherCAT communication. Please suggest, whether we can "program the drive with inbuilt Indexer software and control with SDO communications" or "to assign Axis and control the drive with PDO communications".
Kindly suggest, since i`m new for EtherCAT drive programming.

Regards,

Ramkumar
 

Similar Topics

O
Copley Accelnet and CANOpen
So, I've spent the last days trying to commission a couple of Accelnet ADP drives resulting in that everything is up and running, both motors and...
Replies
5
Views
2,422
Onstege
O
P
Parameter for Drive Restart on Power Restored?
Hello all, I am currently trying to program a PowerFlex 525, version 7.0. We had a power outage recently and when the power was restored, the...
Replies
4
Views
5
chelton
C
M
Can not select other drive in Automation License Manager
Im trying to install a Siemens upgrade license using Automation License Manager v6.0. I clicked D: mistakedly, and now I can not find a way to...
Replies
2
Views
43
Michael385
M
R
Danfoss Aquadrive FC202 - Local command only if no comm
Hey guys. As the title suggests, I need to configure a Danfoss Aquadrive FC202 inverter, so that its logic inhibits the local command when the...
Replies
2
Views
45
Revnus
R
M
Baldor MicroFlex Drive 9A
Hello everyone, my son and I are working on building a metal lathe. I been waiting for a motor/speed controller donor from a treadmill. I finally...
Replies
0
Views
48
magnetron2
M
Back
Top Bottom