naturephoenix
Member
I'm using CX2030 Beckoff PLC. Twincat 3 runtime.
What I'm looking for is option to activated certain PLCTask
once I register certain Digital input.
Whats the purpose?
Well I have PWM output module.
I want to connect PWM output to certain High Speed Digital Input module and by that input start task. Inside that Task I want to cut PWM output.
So what I'm looking for is hardware interrupt option inside twincat studio. Ideal solution would be to start Task with certain delay of Hardware interrupt(rising edge of certain Digital input).
This is possible in Siemens PLC.
You can easily configure to start OB41 on hardware interrupt(on rising edge of certain Digital input ).
What I'm looking for is option to activated certain PLCTask
once I register certain Digital input.
Whats the purpose?
Well I have PWM output module.
I want to connect PWM output to certain High Speed Digital Input module and by that input start task. Inside that Task I want to cut PWM output.
So what I'm looking for is hardware interrupt option inside twincat studio. Ideal solution would be to start Task with certain delay of Hardware interrupt(rising edge of certain Digital input).
This is possible in Siemens PLC.
You can easily configure to start OB41 on hardware interrupt(on rising edge of certain Digital input ).
