You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Reply
 
Thread Tools Display Modes
Old February 14th, 2020, 09:40 AM   #1
Jasondelane
Supporting Member
United States

Jasondelane is offline
 
Jasondelane's Avatar
 
Join Date: Mar 2015
Location: Florence sc
Posts: 189
Danfoss MVC110A control

If anyone has experience with this electrical controlled pilot valve for Danfoss Series 90 pump, could you please explain to me how I'd control it. The data sheet says it's current controlled but it doesn't get into specifics. Do I use a dual or single channel current output module? How do I reverse the flow to reverse the hydraulic motor? PLC is a Compactlogix L32E with Point IO for remote IO.

Thank you
__________________
  Reply With Quote
Old February 15th, 2020, 09:15 AM   #2
PPLLCC
Member
United States

PPLLCC is offline
 
Join Date: Feb 2020
Location: Htwn
Posts: 4
I worked for a main distributor, do you have a spec sheet link?
  Reply With Quote
Old February 15th, 2020, 09:42 AM   #3
Jasondelane
Supporting Member
United States

Jasondelane is offline
 
Jasondelane's Avatar
 
Join Date: Mar 2015
Location: Florence sc
Posts: 189
http://www.insanehydraulics.com/back...os/MCV110A.pdf
__________________
  Reply With Quote
Old February 16th, 2020, 02:19 AM   #4
Saffa
Member
New Zealand

Saffa is offline
 
Join Date: Feb 2012
Location: Bay of Plenty
Posts: 1,020
You will need a valve driver for this that accepts a 4-20mA signal. I don't believe that you can drive this directly from a PLC card.

I'd contact the supplier and see what they recommend.
  Reply With Quote
Old February 19th, 2020, 10:07 PM   #5
Jasondelane
Supporting Member
United States

Jasondelane is offline
 
Jasondelane's Avatar
 
Join Date: Mar 2015
Location: Florence sc
Posts: 189
Update:

I found the valve driver in the old cabinet for the previous machine. I can't find any information on it with the labels that are attached. Just going to wire it up like I found it and go with it.
__________________
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
Advanced Control : Ziegler - Nichols is awful. Peter Nachtwey LIVE PLC Questions And Answers 15 August 13th, 2018 10:52 PM
what is motion control with PLC backendcode LIVE PLC Questions And Answers 1 November 2nd, 2017 04:26 AM
PanelView Plus 600 McBacon LIVE PLC Questions And Answers 8 June 24th, 2013 04:23 AM
Proportional-only control – why won’t it work right? Ron Beaufort LIVE PLC Questions And Answers 13 April 25th, 2005 05:18 AM
how often should I trigger the PID? Ron Beaufort LIVE PLC Questions And Answers 11 February 22nd, 2003 11:57 AM


All times are GMT -5. The time now is 01:51 PM.


.