Greg Dake
Member
Hello!
Please see attached. This is for a Badger Meter flow meter. I am looking at the analog output and wondering if this will work with a standard 4-20mA input card in the PLC. I see that the max load resistance is less than the 250 ohms at the 4-20mA input card. Will this work with a standard 4-20mA input card?
TIA,
Greg
Please see attached. This is for a Badger Meter flow meter. I am looking at the analog output and wondering if this will work with a standard 4-20mA input card in the PLC. I see that the max load resistance is less than the 250 ohms at the 4-20mA input card. Will this work with a standard 4-20mA input card?
TIA,
Greg