I have an existing machine with an IFM RN6057 encoder (dat sheet attached) fitted.
This encoder has 2 outputs:
- SSI singleturn
- Incremental A+B (sinusoidal 1Vpp)
The existing control system is using the SSI output and working fine.
I'd quite like to use the incremental output from this encoder but need it as a square wave input into my counter module.
Do any of you guys know of an off-the-shelf converter from 1Vpp to 5V or 24V square wave?
This encoder has 2 outputs:
- SSI singleturn
- Incremental A+B (sinusoidal 1Vpp)
The existing control system is using the SSI output and working fine.
I'd quite like to use the incremental output from this encoder but need it as a square wave input into my counter module.
Do any of you guys know of an off-the-shelf converter from 1Vpp to 5V or 24V square wave?