You are not registered yet. Please click here to register!

plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
Try our online PLC Simulator- FREE.  Click here now to try it.

New Here? Please read this important info!!!

Go Back - Interactive Q & A > - Interactive Q & A > LIVE PLC Questions And Answers

Thread Tools Display Modes
Old September 19th, 2023, 02:48 AM   #31

Nesalex is offline
Join Date: Sep 2023
Location: Europe
Posts: 2
Yes. It is a module located on the right side of the PLC. I have an HMI backup and a PLC backup from the supplier. The device is fully functional. It seems strange to me that I can edit the panel but connect to the PLC, I don't know. It's a bit complicated. Thanks for the manual. I will try to study it and hope to understand and find a way to set it up so that it works. In any case, I have already ordered the USB-SC09-FX cable for I believe a simple connection to the PLC. I tried setting via FX configurator EN, but unsuccessfully...
  Reply With Quote
Old September 19th, 2023, 06:49 AM   #32
United Kingdom

parky is offline
parky's Avatar
Join Date: Oct 2004
Location: Midlands
Posts: 5,248
There are two ways to communicate & set the Ethernet card.
RS232/422 (com port using the SC09 cable) or via ethernet.
Using ethernet the IP address of your programming PC must be in the same area i.e. if your ENET was then I suggest your programming PC be or any other 0-254 but not 23. set the subnet to
This should enable you to connect via Ethernet, upload the existing configuration & save it as you do not want to loose the existing one so you can always go back. There may be a melsoft connection as this communicates with a got already I suspect it already has one so it could be your connection between PC & PLC i.e. address or some other problem, however, if it has already got a Melsoft connection just add another.
Attached Images
File Type: png FX-EN.png (86.8 KB, 9 views)
  Reply With Quote
Jump to Live PLC Question and Answer Forum

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
RSLinx OPC Read with VB.NET Extremely Slow Archie LIVE PLC Questions And Answers 1 September 20th, 2015 09:22 PM
Any idea how to access the Omron simulator? strantor LIVE PLC Questions And Answers 9 March 13th, 2015 07:01 PM
a device send DO thu its Modbus, can I connect to Micrologix and read that data ? leonlai LIVE PLC Questions And Answers 6 October 15th, 2012 12:14 PM

All times are GMT -4. The time now is 08:42 PM.