Replicate video pause button via RSView - PLCS.net

JimU · September 18th, 2023, 01:24 PM

I have a request to integrate a pause button in RSlogix to be able to start/stop a video. Video format is not defined at the moment, so it could be running in a PPT or just an.avi, mpeg etc. Maybe some type of activeX control or an output from the plc to interface to some type of remote? Has anyone done this before or know how to implement?

drbitboy · September 18th, 2023, 04:06 PM

What hardware is running the video?

What (operating) system is running the video?

What other programs are running on (the hardware and operating systeme that is running the video)?

What program is running the video?

What communication options are available on the the device that is running the video (serial port, ethernet, tcp/ip, parallel port, keyboard, etc.)?

What communication option are available on the RSLogix-programmed-device that senses the pause button?

JimU · September 18th, 2023, 06:01 PM

The video will be running on a dedicated window 10 platform with whatever app is available from MS.
After doing more digging, I found a keyboard emulator that plugs into the USB port of the PC. I think I can use a couple outputs from the plc to drive some PLC interface relays (Phoenix Contact PLC-RPT) that will be wired to the emulator. The emulator is a I-PAC2. I found this info on another forum.

September 18th, 2023, 01:24 PM	#1
JimU Member Join Date: Sep 2023 Location: KY Posts: 2	Replicate video pause button via RSView I have a request to integrate a pause button in RSlogix to be able to start/stop a video. Video format is not defined at the moment, so it could be running in a PPT or just an.avi, mpeg etc. Maybe some type of activeX control or an output from the plc to interface to some type of remote? Has anyone done this before or know how to implement?

September 18th, 2023, 04:06 PM	#2
drbitboy Lifetime Supporting Member Join Date: Dec 2019 Location: Rochester, NY Posts: 7,015	What hardware is running the video? What (operating) system is running the video? What other programs are running on (the hardware and operating systeme that is running the video)? What program is running the video? What communication options are available on the the device that is running the video (serial port, ethernet, tcp/ip, parallel port, keyboard, etc.)? What communication option are available on the RSLogix-programmed-device that senses the pause button? __________________ _ Brian T. Carcich i) Take care of the bits, and the bytes will take care of themselves. ii) There is no software problem that cannot be solved with another layer of indirection. iii) Measurement is hard. iv) I solemnly swear that I am up to no good v) I probably have the highest ratio of forum posts to actual applications in the field (but no longer ∞ ). vi) Hakuna matata. vii) Bookkeeping.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
RSView Studio, greyed out User Account	duckman	LIVE PLC Questions And Answers	1	August 4th, 2019 06:35 PM
FT View SE V10- VBA Mouse Button code works only on Button 1 not Button 2	Tanquen	LIVE PLC Questions And Answers	0	November 4th, 2018 04:52 PM
Factory Talk ME Press and hold button	Mteller	LIVE PLC Questions And Answers	22	March 15th, 2018 12:37 PM
To Latch Or Not To Latch	BOWRIDER	LIVE PLC Questions And Answers	43	October 21st, 2015 05:19 AM
RSView Animation		LIVE PLC Questions And Answers	1	October 15th, 2003 02:35 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.*

September 18th, 2023, 06:01 PM	#3
JimU Member Join Date: Sep 2023 Location: KY Posts: 2	The video will be running on a dedicated window 10 platform with whatever app is available from MS. After doing more digging, I found a keyboard emulator that plugs into the USB port of the PC. I think I can use a couple outputs from the plc to drive some PLC interface relays (Phoenix Contact PLC-RPT) that will be wired to the emulator. The emulator is a I-PAC2. I found this info on another forum.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)