Using EB Pro on the MT8071iP, I have several sections on machine with screens
and wrote one program with all the screens for all the sections thinking I could have one spare to be used anywhere already programmed. But since everything is all on the same Ethernet network the only way I could come up with to let the screen know what section it was to be was to also use the RS232
and a cable to PLC (1400) This would let screen see one bit in processor to know what processor it was on. Anyone have any other ideas.
and wrote one program with all the screens for all the sections thinking I could have one spare to be used anywhere already programmed. But since everything is all on the same Ethernet network the only way I could come up with to let the screen know what section it was to be was to also use the RS232
and a cable to PLC (1400) This would let screen see one bit in processor to know what processor it was on. Anyone have any other ideas.