Bling_bling Lifetime Supporting Member B Join Date Nov 2016 Location Ohio Posts 23 Nov 20, 2017 #1 how do I make a timer timing bit in a micro 830 program using connected components?
damica1 Member D Join Date Aug 2015 Location Illinois Posts 839 Nov 20, 2017 #2 I don't know exactly what you mean? What are you wanting to do?
Bling_bling Lifetime Supporting Member OP B Join Date Nov 2016 Location Ohio Posts 23 Nov 20, 2017 #3 im new to the connected components and micro 830 and it doesnt seem to have a "timer timing" bit in the timer? do you have experience in ccw?
im new to the connected components and micro 830 and it doesnt seem to have a "timer timing" bit in the timer? do you have experience in ccw?
Bullzi Lifetime Supporting Member B Join Date Jun 2012 Location Colorado Posts 1,530 Nov 20, 2017 #4 You have to take the Timer Enable AND NOT Timer Done to get a TT bit. Here it is in Ladder: ----Timer.EN-----Timer.Q--------Timer_Timing ------( )------------(\)---------------O
You have to take the Timer Enable AND NOT Timer Done to get a TT bit. Here it is in Ladder: ----Timer.EN-----Timer.Q--------Timer_Timing ------( )------------(\)---------------O
damica1 Member D Join Date Aug 2015 Location Illinois Posts 839 Nov 20, 2017 #5 Here is an example of how one might use the TON function in CCW. Ton_10.Q will fire when the time has reached the .PT value (In this case 15 minutes) So in the above example this timer will execute every 15 minutes because when TON_10.Q opens/closes this will cause the timer to reset itself. But if you can describe what you are wanting to do, there may be a much better way of getting the end result.
Here is an example of how one might use the TON function in CCW. Ton_10.Q will fire when the time has reached the .PT value (In this case 15 minutes) So in the above example this timer will execute every 15 minutes because when TON_10.Q opens/closes this will cause the timer to reset itself. But if you can describe what you are wanting to do, there may be a much better way of getting the end result.
Bling_bling Lifetime Supporting Member OP B Join Date Nov 2016 Location Ohio Posts 23 Nov 20, 2017 #6 thanks guys. I appreciate it.