OT: Fugi (Fuji) Drive Terminals from Fanuc Controlled Machine

Hi

Anyone know what the pinouts on the control (ie start/stop etc etc) plug is on a

Fugi Invertor FMD 5AN 21

This is a unit from a Fanuc CNC Lathe around 20 years old.

I have been told the connector on the drive is a Honda type connector.

It has 25 Pins

2 rows of 9 top and bottom with 7 in the middle of these.

Just remembered more info

The drive cover/case has frenic5000 (i think) on it.

Could really do with a manual or the pinouts for tomorrow if possible.

All help appreciated!

Anyone out there know anything about this drive ?

For anyone else having this drive and wanting this info then here is the basics for getting the drive to run :-


CN1-7 Motor PTC's
CN1-15 Motor PTC's

CN1-25 Common (PNP)
CN1-24 Spindle Alarm (PNP)
CN1-22 Spindle Zero Speed (PNP)
CN1-23 Spindle Speed Arrival Signal (PNP)

CN1-2 0V
CN1-17 0-10Vdc Auto Speed Setting Input Signal
CN1-9 Screen

CN1-18 Forward
CN1-19 Reverse
CN1-14 Common

CN1-5 Link to 6
CN1-6 Link to 5

Looking for spare parts for Fugi Micrex f70s PLC. Willing to buy used spares