Reset P0251 parameter in sinamics G150

mehdir

Member
M
Join Date
Sep 2012
Location
naien
Posts
11
Hi Dear
i have A30042 alarm on sinamics G150 and i know that must to set P0251=0.
but in parameter list in all access level on AOP30 and in starter software in PC after uploading parameters, P0251 & P0252 dont exist(not seen). what do i do to activate thease parameters?
berst regards
 

Similar Topics

J
Emergency Stop reset Siemens
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ? Have to shut off main switch at least 10 times on...
2
Replies
19
Views
267
John Lee
J
D
Reset PLC Horner?
I was loading a program onto an XE1e2 PLC and it got stuck on these two windows and won't progress. It won't let me connect from the PC to reload...
Replies
0
Views
73
Data_name
D
moistcat
Factory Reset 4RF Aprisa SR+
Hi all, i have recieved some 4RF Aprisa SR+ ethernet radios from a customer to configure. Issue is that they are used and have non-default...
Replies
0
Views
76
moistcat
moistcat
id10t_error
1769-L24-QBFCB1 Embedded Counter Fault Reset (OK Light Flashing)
Hi Guys, I have a 1769-L24-QBFCB1 that has the OK light flashing on the embedded counter module. The manual states it is a resettable fault, but...
Replies
0
Views
104
id10t_error
id10t_error
G
Data log time is reset in HMI
We are using RED LION HMI Since las 15 years. To day we have found that My log file has data up to 22 Mar 2024 1:16. Then After new Log File is...
2
Replies
23
Views
1,451
arpus4KM
A
Back
Top Bottom