chavak
Member
- Join Date
- Jul 2002
- Posts
- 750
I'm working on a retrofit job, it is using a Control Logix L55, Ver 13, with Devicenet IO and Ultra 3K drives on Devicenet.
Now I need to add in a Zumbach measurement sensor on Ethernet IP, and received the EDS file from the vendor. Unfortunately I don't see an option under "Tools" menu to add an "EDS Hardware Installation Tool" option unlike the newer version. Although I installed the EDS file in Ver 27, it doesn't show up in Ver 13.
Is there any workaround for this situation.
Thank You
Best Regards
Now I need to add in a Zumbach measurement sensor on Ethernet IP, and received the EDS file from the vendor. Unfortunately I don't see an option under "Tools" menu to add an "EDS Hardware Installation Tool" option unlike the newer version. Although I installed the EDS file in Ver 27, it doesn't show up in Ver 13.
Is there any workaround for this situation.
Thank You
Best Regards