sweety616 Member S Join Date Jul 2005 Location New Jersey Posts 36 Jan 23, 2006 #1 How do I power up a panelview? the box says it needs 24V DC power. I need to turn it on for a few minutes to check my program before I actually mount it and connect it to the network
How do I power up a panelview? the box says it needs 24V DC power. I need to turn it on for a few minutes to check my program before I actually mount it and connect it to the network
castlerock Member Join Date Oct 2005 Location MP-310 Posts 94 Jan 23, 2006 #2 I needed 24 volts to power a SLC-500 so i picked up one of these.
Mark Buskell Member M Join Date Sep 2003 Location Florida Posts 892 Jan 23, 2006 #3 If this is connected to a SLC processor, you could use the 24V off the power supply to check it out on a temp basis.
If this is connected to a SLC processor, you could use the 24V off the power supply to check it out on a temp basis.