Add Comm Module to PV600

asmaint2

Supporting Member
Join Date
Jul 2009
Location
Defiance, Ohio
Posts
31
Good Evening Everyone,

I have a PanelView standard 600 touch only 2711-T6C2L1X(DH485) and I have a 600 T6C20L1(Ethernet). Is it possible to take the Ethernet comm module out of the 20L1 and mount it in the 2L1X? I know there is a place for it, but how do you get the 2L1X to recognize the new comm module?

Thank you in advance for any advice.
 
You cannot substitute communication modules in PanelView Standard terminals.

It would be neat if you could, but you can't.
 

Similar Topics

Im trying to create a level indicator for water Tank i have used the ADD function while the pump is on and level increasing everything works...
Replies
14
Views
108
We are trying to poll data coming from a PLC for remote monitoring we have the IP address of the PLC and the default port number and the path is...
Replies
25
Views
418
Hello The plant is running and there is no shutdown nowadays therefore I can add 1734- AENTR and its card while PLC is in Run? I do not wanna...
Replies
1
Views
113
PLC: Fx5u CPU As Per manual High Speed Input Module can add from Navigation window  [Parameter]  [Module Information]  Right-click  [Add New...
Replies
1
Views
71
Back
Top Bottom