SMOKE
Member
I think someone should post a PLC programming challenge each week. Must post via Acrobat since we all use different software.
Good start.The average of 2 vectors is easy but how would you go about averaging more than 2 vectors?
Yes, it does require a little math but you should have had this in high school.You are a very evil Man Peter roflamo!!!!!!!!!!!!!!!!. I seem to recall how intense the math was on this problem.
There is no standard deviations or harmonics involved.You need to calculate the standard deviation of the horizontal wind component which has two components the scalar wind speed, and the harmonic wind speed. this is part of the speed computations.
Yes, that is the problem.Then you will need to convert the degrees to a valid mean value.