Connecting Siemens S7 300 with digitax STBasic Servo Drive

osamamalhy

Member
Join Date
Jan 2006
Location
alex
Posts
89
Greeetings

i do need to connect the control Teqniques Servo Drive digitax Basic to Siemens PLC
i do use Profibus communication Module in the Servo Drive
i do install the GSD file From emreson Web site
i do install the GSD file in my PLC hardware configuration

after all that i did not mange to communicate between the drive and the PLC

can any one help me with that

do some one have any prevuse project like this one

kindly advcie
 

Similar Topics

As a part of the final year Bachelor Thesis project I and two others are involved with, I have been tasked with setting up an HMI/SCADA system...
Replies
5
Views
8,606
Hi guys, I'll be doing 2 projects using Siemens PLC, S7-200 and S7-300. Can someone please let me know what is the correct programming...
Replies
1
Views
1,939
Hi All, I have a closed loop stepper motor (Nanotec make), https://en.nanotec.com/products/2512-pd4-e601l42-e-65-4. This uses MODBUS TCP for...
Replies
4
Views
3,664
Hello, I'm attempting to connect to a Siemens S7-1200 CPU with an unknown IP address. I'm new to Siemens and also new to using VMware. I've...
Replies
7
Views
1,899
Hi ! i need to connect 2 plcs . S5 Siemens to > Unisream of unitronics . my idea is to do RS232 by the I/O . Meaning to use 1 output from the...
Replies
7
Views
2,108
Back
Top Bottom