AB PLCs communication task

hammadalizaman

Member
H
Join Date
Apr 2016
Location
Rawalpindi
Posts
1
Dear All,
I want to know how to communicate to AB PLCs located in different areas of plant. What hardware will be required like Fiber Optic Cable and converter or ethernet devices. How to setup PLCs to communicate with each other?
 

Similar Topics

P
Is put/get necessary for communication between 2 PLCs?
Or there is an alternative to this? I suppose there are many but I've only seen put/get Can you for example set up a new plc and connect it to an...
Replies
5
Views
289
JesperMP
JesperMP
A
Communication between AllenBrandly and S7 1500 PLCs
How to Communicate Allen Brandly PLC and S7 1500 PLC? Do I need extra Hardware ? How ?
Replies
9
Views
1,008
RET
R
H
Asking for communication betwwen 2 PLCs and 1 HMI
hello everyone, I have 2 PLCs controller : Micro850, and 1 HMI PV800. I use CCW to write the program. I already finished programing for both PLCs...
Replies
2
Views
1,431
hoainam2310
H
S
Communication between two PLCs
Hi all, I have two PLCs, M251 of SE, reading data from the same device. One is reading via modbus 485, other one via tcp. I now want the rtu plc...
Replies
0
Views
1,064
Sham
S
T
Can you recommend a PLC capable of communication with up to 100 other PLCs?
I'm on the hunt for for a "Balance of Plant" PLC (or alternative) that is capable of exchanging (sending and receiving) a small number of bit...
Replies
6
Views
2,164
widelto
widelto
Back
Top Bottom