Offshore Fire & Gas System (Autronica) problem

Guys,

I'm having a problem with Autronica Autrosafe system. It is a rig fire & gas system, for accomadations. This system is freezing almost twice a day. I think it has a memory problem, but I’m having problems for getting the diagnostics.

Has anyone worked with this system before? I want to do some tests before calling the vendor.


Thanks,

Kevin

Autronica Autrosafe

Kevin,

I don't know if this is your case, but it may work for you!

http://automatoes.com/questions/25/problems-with-autronica-autrosafe-probably-on-eac-300-board

good luck!

Nice

Thank you Gallahar!!

It worked like a charm!

"Error:Could not initialise Ssio" message on Autrosafe BS-310

Our Fire alarm system controled by Autrosafe BS-310 control panel.[FONT=&quot]After applying the power supply autrosafe program could not load, [/FONT][FONT=&quot]on the monitor appears counter, after 20 sec continuously beep, system fault indicator and after approximately 2 min appears message: “Error: Could not initialize Ssio”, who knows what that means. [/FONT]