Hello all,
I have a GT32 HMI and GTWIN 2.93 software in my PC. A USB cable is connected between GT32 usb port and PC usb port. When I do communication setting. I use RS-232C and only COM1 and COM3 avilable. But I try both and there were not communication between PC and GT32. Does anyone know how to build the communication? Thanks in advance.
I have a GT32 HMI and GTWIN 2.93 software in my PC. A USB cable is connected between GT32 usb port and PC usb port. When I do communication setting. I use RS-232C and only COM1 and COM3 avilable. But I try both and there were not communication between PC and GT32. Does anyone know how to build the communication? Thanks in advance.