GT32 HMI communication problem

Tony2006

Member
T
Join Date
Oct 2006
Location
Ontario
Posts
4
Hello all,

I have a GT32 HMI and GTWIN 2.93 software in my PC. A USB cable is connected between GT32 usb port and PC usb port. When I do communication setting. I use RS-232C and only COM1 and COM3 avilable. But I try both and there were not communication between PC and GT32. Does anyone know how to build the communication? Thanks in advance.
 

Similar Topics

G
Panasonic GT32 software
Team, I have a Panasonic GT32 HMI that died last night. The cost from the company is $1800 to replace it. I can get a comparable one for $800...
Replies
1
Views
1,289
sigmadelta
S
S
GTWIN w/ GT32 switch & lamp question
Is there a way in GTWIN to have a lamp come on and stay on when a momentary switch is pressed, but go off when a different switch is pressed-...
Replies
0
Views
1,885
slewis
S
M
HMI Connection - {::[PLC1]Program:#1.#3.Abc.Efg} What is the #1.#3 ?
I'm having a hard time either remembering or figuring this out. I have a PLC program and the associated HMI program. I know what this means...
Replies
4
Views
117
plvlce
P
X
Detection of HMI Status in the PLC ?
Hello, I'm working with Studio 5000 and ME Station, and I'm trying to find a way to detect if the PC with the HMI is shut down or not. I've tried...
Replies
5
Views
150
Ken Roach
Ken Roach
N
RSLogix5000 --> C-More HMI; Array --> Text String
Hello everyone, Wondering if anybody can help me with this: I have a CompactLogix processor running a little robot cell. Every 200 cycles...
Replies
8
Views
173
nutcase511
N
Back
Top Bottom