GT32 HMI communication problem

Tony2006

Member
T
Join Date
Oct 2006
Location
Ontario
Posts
4
Hello all,

I have a GT32 HMI and GTWIN 2.93 software in my PC. A USB cable is connected between GT32 usb port and PC usb port. When I do communication setting. I use RS-232C and only COM1 and COM3 avilable. But I try both and there were not communication between PC and GT32. Does anyone know how to build the communication? Thanks in advance.
 

Similar Topics

G
Panasonic GT32 software
Team, I have a Panasonic GT32 HMI that died last night. The cost from the company is $1800 to replace it. I can get a comparable one for $800...
Replies
1
Views
1,289
sigmadelta
S
S
GTWIN w/ GT32 switch & lamp question
Is there a way in GTWIN to have a lamp come on and stay on when a momentary switch is pressed, but go off when a different switch is pressed-...
Replies
0
Views
1,883
slewis
S
V
Shihlin HMI
hi there, I'm a beginner pls help when transferring pc to hmi there's an error message on shihlin hmi written com1 station 1: communication...
Replies
1
Views
72
DarrylR
D
H
Mitsubishi FX3G PLC with Beijer HMI E615
Hello, I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer. I'm using GXWorks 2 to do the programming and I have no problem...
Replies
4
Views
149
NicoSz
N
B
Advantech TCP-1250H HMI upload/Download
Good people of PLCs.net, I am currently working with an HMI that is advantech 1250H, that communicates with a 1769 Compact logix and Currently...
Replies
2
Views
79
bdauliya
B
Back
Top Bottom