Ones_Zeros
Member
Hello
I have a second timer in a Modicon PLC program.
assigned to register 41745
The operator is going to have the ability to change
this Setpoint via Wonderware SCADA software.
How can I program this in the PLC so the operator
doesn’t have to convert minutes to seconds.
I would like for them to input 5 minutes instead of 300 seconds.
I’ve tried the DIV function but I’m not doing it correctly. I thought all
I had to do is use the div function to divide by 60 but it’s not working.
I appreciate the help
Thanks!
I have a second timer in a Modicon PLC program.
assigned to register 41745
The operator is going to have the ability to change
this Setpoint via Wonderware SCADA software.
How can I program this in the PLC so the operator
doesn’t have to convert minutes to seconds.
I would like for them to input 5 minutes instead of 300 seconds.
I’ve tried the DIV function but I’m not doing it correctly. I thought all
I had to do is use the div function to divide by 60 but it’s not working.
I appreciate the help
Thanks!