Aga3 flow calc in rtu

An RTU is an RTU. A PLC is a PLC.

Doesn't the RTU have the AGA 3 calc built-in?
AGA_3.jpg


Here's Emerson's white paper on the AGA 3 calculation:
http://www.documentation.emersonpro...documents/instruction_manuals/d301224x012.pdf
 

Similar Topics

Anyone have a function block or structured text routine they would like to share for the logix series plc? Figured I would ask before I put...
Replies
1
Views
1,301
Hi, I am writing a Controllogix program to calculate gas flowrate. I need the flow calcualtion for AGA3 standards. I have looked at the...
Replies
4
Views
5,453
Dear All, I need a sample PLC program to count the output pulse of a mass flow meter so that a specific amount of mass (for example 100gm)can be...
Replies
2
Views
82
Has anyone installed Hp laserjet pro 4203 to OMNI 3000 or 6000 via ethernet..Is there a specific Config? I have a problem..Please advise
Replies
0
Views
43
I can't seem to figure out how to add descriptors to I/O points on an RMC using PCCU. Say, for example, I want to use "Valve_1" as a descriptor...
Replies
0
Views
60
Back
Top Bottom