sopenco
Member
Okay, I'm new to MicroLogix and a little lost here. I've searched my AB references, Google and this forum and still can't find the knowledge I need.
I have an ML1400 and I simply wish to replace the program in memory with a different program written offline.
I've tried upload, going online, clearing the PLC memory, and still, it closes my offline work and goes to the blank / empty program in memory. Even when I edit THAT program, it won't allow me to save changes.
I'm connected over ethernet, RSLinx appears to be working fine, I'm using the latest versions of that and RSLogix 5000 if any of that's relevent.
As always - I'm grateful for any help / guidance I can get along the way with this...
I have an ML1400 and I simply wish to replace the program in memory with a different program written offline.
I've tried upload, going online, clearing the PLC memory, and still, it closes my offline work and goes to the blank / empty program in memory. Even when I edit THAT program, it won't allow me to save changes.
I'm connected over ethernet, RSLinx appears to be working fine, I'm using the latest versions of that and RSLogix 5000 if any of that's relevent.
As always - I'm grateful for any help / guidance I can get along the way with this...