SIEI servo drive

Cransh

Member
C
Join Date
Jan 2017
Location
Aleppo
Posts
1
Hello everyone

Can anybody help me to find any information about the SIEI XVy-3-33/58-KBA-EWH/VE.

I need the EDS for the CanOpen and the manual of the drive, I've spent few hours on google with no luck.

I've The drive connected to B&R 2003 PLC by Canbus (mostly CanOpen).


Thank you all in advance.
 

Similar Topics

H
SIEI drive blowing control board fuse
I have replaced our SIEI drive with a new unit and it continues to blow the control board fuse every time I power the unit up (enable drive) it is...
Replies
0
Views
1,824
hotrod
H
D
Selecting fuse size for servo amplifier
Hi, I'm working on Mitsubishi MR-J5-70A amplifier, and need some advice on selecting fuse size. Main power is 1ph 240VAC, and in the manual, it...
Replies
1
Views
45
OkiePC
OkiePC
S
Servo Valve showing MSO.ER 11
Good morning, We've had an issue with a couple of servo valves and was wondering if anyone had seen anything similar. After a drop in pressure...
Replies
2
Views
93
robertmee
R
I
Make an HMI convert from inches to PUUs (numeric input) before writing to servo drive
Hello all, I'm currently working on a servo motor linear positioning system (ball screw). I'm all set up regarding communication between my HMI...
Replies
1
Views
90
parky
P
U
Siemens s120 servo tune
Hi all, I am having a machine with old 802d sl siemens controller. I am trying to tune servo by Siemens starter software. Anyone experienced...
Replies
0
Views
69
Udayb
U
Back
Top Bottom