How can able to get Tx and Rx Packet/Byte Values in PLC

Velpandian P

Member
V
Join Date
Aug 2019
Location
Tamilnadu
Posts
4
Hi everyone!

I just want to get the transmit and receive data bytes nor packets value from rs-232 com port in compactlogix L32E controller. Else, please give some solution about to get those data bytes/packets value in wonderware intouch.

Please assist me, if anyone have any idea about it.
 

Similar Topics

D
SLC 500 - unable to verify settings due to packet timeout
When I try to connect my SLC 500 to my deskptop it tells me "unable to verify settings due to packet timeout" I already bought a null modem cable...
Replies
13
Views
16,139
bernie_carlton
bernie_carlton
M
unable to verify settings due to packet timeout! Check all cables and configuration a
I am trying to configure RS Linx to talk to a Micrologix 1200. The micrologix was connected to a panelview so I took out its RS-232 cable and...
Replies
1
Views
6,409
Ken Roach
Ken Roach
F
Opc server is unable to load project controller CCW
I am running CCW 13 trying to upload to a micro 820 vers.12 I get an output message OPC server is unable to load project controller. Please help!
Replies
1
Views
103
Old Man
O
G
Bypass or disable part of a machine
Hello, I am still new to PLC programming and I just got this job two year out of school so I don’t remember much. I was given a task were I have...
Replies
1
Views
160
Steve Bailey
Steve Bailey
Z
License doesn't enable WindowMaker-exiting
Hello I have In touch 10.1 I tried to enter the WindowMaker to make some adjustments I am using a dongol for the license . I can access the...
Replies
1
Views
73
robertmee
R
Back
Top Bottom