Cable redundancy status Cimplicity

ACM123

Member
A
Join Date
Feb 2020
Location
Stg
Posts
1
Hi everyone,

I have a problem, i want to know the channel status in server redundacy with cable redundacy setup , on Cimplicity v10. I tried to use the "IP status API" but but it does not signal the specific error of the channel.

Any of you guys know how to get the channel status between servers and clients?
 

Similar Topics

mad4x4
Profibus DB - Cable Redundancy
Ok here is the problem we have a Siemens DP PLC (Master) and RIO ( slave) at the end of a Fiber Cable that runs through a Slip ring via OLMs...
Replies
1
Views
483
Ken Moore
Ken Moore
M
FO cable cause contrologix redundancy disqualification
hi all, Please refer to the system configuration. When the Fiber optics line shown in black circles was removed from the network the redundancy...
Replies
0
Views
1,462
mahone
M
S
Profibus : Cable Redundancy
Is the of Cable redundancy ( i.e RS-485 Communiation cable) on PROFIBUS been implemented ? Does in achieve the purpose of HOT STANDBY in case of...
Replies
2
Views
4,792
chakorules
chakorules
T
Universal IrDA cable
Can anyone recommend a universal USB to IrDA cable for interfacing with power meters? I see a lot of generic units but hoping someone has...
Replies
0
Views
39
Tim Ganz
T
S
Schneider plc SR2A201BD programming cable
Hi Please I have zeilo smart relay #SR2A201BD but I don't have it's programming cable. Can I use any general usb/rs232 converter? Or need...
Replies
2
Views
97
swissi
S
Back
Top Bottom