EXPDD250-V3 Hardware Key

Tiffany Hanley · Jul 6, 2007

We have been using EXPDD version 3 with the correct hardware key on a laptop running windows 2000 successfully to programme Toshiba M40's for several years. We are now using a laptop running windows XP and the key is no longer detected by EXPDD. Has anyone else had this problem or does anyone know if its some sort of compatibility problem?

John Soltesz · Jul 6, 2007

Is this a parallel printer port key? There are port settings that could not allow it to work. I remember on some old software we needed to check the settings. Can you print from that port? Check in Device Manager to see if it is active. There are some things to try there.
The other thing to check is a security software patch/upgrade. I have had problems with Win XP & Intellution starting up very slow (10 minutes to open) but normal with the upgrade.
Otherwise good luck,
John

Tiffany Hanley · Jul 6, 2007

Thanks John.
Printer works fine and the port looks fine within Device Manager. Think i will try contacting Toshiba again, unfortunately this software is no longer supported and the company we got the software key from was taken over in 2003 and they don't deal with Toshiba stuff anymore. Oh well, I better keep looking.

jrwb4gbm · Jul 6, 2007

Go to this link, download the V2 & V3 files. They work without a key. One does "Offline",the other does "Online".

http://www.toshiba.com/ind/downloads_main.jsp



Category          Product Family         Download Type 

  PLCS               Legacy              Setup Software 

Click "Apply Filter"

wrager69 · Mar 26, 2013

jrwb4gbm said:
Go to this link, download the V2 & V3 files. They work without a key. One does "Offline",the other does "Online".

http://www.toshiba.com/ind/downloads_main.jsp

Category Product Family Download Type
PLCS Legacy Setup Software
Click "Apply Filter"

I have a Toshiba EX100 and EXPDD250V3 software. I am trying to find a PDD250-SKEY. Any idea where I can get one?

cyberunlimited · Jun 26, 2014

Need to know how to download the V2 and V3.

Please be more specific on the way to download the V2 and V3 programs for the EX PLC Programming.

Thank You.

jrwb4gbm · Jun 26, 2014

cyberunlimited said:
Please be more specific on the way to download the V2 and V3 programs for the EX PLC Programming.

Thank You.

Check your Private Messages

RobertoIadecola · Jul 2, 2014

I too have the same problem. I even lost the dongle. What can I do to use and continue to read, write and print?? The software I use is pdd250 v 3.0d ... I tried to download the software but can not find them .... would you be so kind as to direct me

RobertoIadecola · Jul 2, 2014

I too have the same problem. I even lost the dongle. What can I do to use and continue to read, write and print?? The software I use is pdd250 v 3.0d ... I tried to download the software but can not find them .... would you be so kind as to direct me

msanthosh · Jan 18, 2018

PLC ex100, AI32

We have an old ROV Viper which uses PLC......PLC EX100, AO32, AI32.....also have many floppy disks with softwares in it........Unable to open the Floppy disk.....contacted toshiba.....says above PLC are obsolete. need all the esteemed personnel advise / help...
The Rov system is working manually....but not through the PC system
which is by PLC.

wrager69 · Jan 18, 2018

Help

msanthosh said:
We have an old ROV Viper which uses PLC......PLC EX100, AO32, AI32.....also have many floppy disks with softwares in it........Unable to open the Floppy disk.....contacted toshiba.....says above PLC are obsolete. need all the esteemed personnel advise / help...
The Rov system is working manually....but not through the PC system
which is by PLC.

********************

Feel free to contact me directly [email protected]

jrwb4gbm · Jan 18, 2018

msanthosh said:
We have an old ROV Viper which uses PLC......PLC EX100, AO32, AI32.....also have many floppy disks with softwares in it........Unable to open the Floppy disk.....contacted toshiba.....says above PLC are obsolete. need all the esteemed personnel advise / help...
The Rov system is working manually....but not through the PC system
which is by PLC.

I sent you a link in a Private message. The software is archived there. If no luck Search keyword "daleroe" (without the quotes) here on this site under advanced Search.

EXPDD250-V3 Hardware Key

Tiffany Hanley

Member

John Soltesz

Member

Tiffany Hanley

Member

jrwb4gbm

Lifetime Supporting Member

wrager69

Member

cyberunlimited

Member

jrwb4gbm

Lifetime Supporting Member

RobertoIadecola

Member

RobertoIadecola

Member

msanthosh

Member

wrager69

Member

jrwb4gbm

Lifetime Supporting Member

Similar Topics