connect pc with b&r plc with rs 232 cable

ttzolab

Member
Join Date
Nov 2013
Location
athens
Posts
1
hello i have connect with hardware level, ask i what software need run to diagnostic communication port, the automation software its ok for this? please if possible tell me steps in software to verify port rs232 is ok, and what others tests is usufull to tes good working the plc
 

Similar Topics

I am using Mitsubishi PLC :FX3g and downloaded the program in it. When I connect Mitsubihi FX2N-4DA expansion module, it lost its communication...
Replies
3
Views
243
Hi, The VersaMax PLC suddenly stop running (no LED on run function) so I'm trying to upload the program. The HMI connected to it says "Host...
Replies
0
Views
117
hi hello every one . i have a Omron nt31c hmi and i want to connect with ls plc XBC DR60SU via rs232 . do any one now how ?? secondly :i have...
Replies
1
Views
184
I'm trying to establish communication between an HMI DELTA (DOP-B07E515) and a PLC IDEC (FC6A-D16R1CEE) via the RS-232C/485 module (FC6A-SIF-52)...
Replies
2
Views
500
Sorry for the basic question: At the moment, the PLC [S7-1200] is connected to a laptop (contains TIA Portal) via the ethernet port. When I add...
Replies
10
Views
1,427
Back
Top Bottom