Communication between VB & Keyence PLC

niteshk266

Member
N
Join Date
Mar 2018
Location
bhiwadi
Posts
1
Dear sir
I want to communication keyence plc model No-KVN60AT with VB.i want to read data memory value on my VB software,Can you guide me ,what string i would send to vb to read data memory value.,I need hex address of keyenc plc with function code
 

Similar Topics

L
Communication between keyence HMI and Mitsubishi PLC
I have got a Mitubishi PLC and a Keyence HMI. For interfacing I am using a BD card module. Now I don't have a communication cable so what I have...
Replies
9
Views
2,965
Ltpriyank
L
Y
Communication between Delta plc DVP12SA2 and Arduino using MAX 485 module.
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Replies
4
Views
80
yawin
Y
P
Is put/get necessary for communication between 2 PLCs?
Or there is an alternative to this? I suppose there are many but I've only seen put/get Can you for example set up a new plc and connect it to an...
Replies
5
Views
298
JesperMP
JesperMP
A
Loss of communication between PLC and SEW frequency converter
Communication between devices will stop working for a certain period of time. I caught the error message using WireShark. I cannot identify the...
Replies
0
Views
98
AdamV
A
B
Communication error between TM221 with magelis HMIGTO
I am having trouble running the application throught my PLC, tm221me32tk with magelis HMIGTO6310 I have prepared the plc programme, also created...
Replies
0
Views
105
BODUSEYTU
B
Back
Top Bottom