Hi everyone, I will appreciate help from anyone who can advice me on how to read from MITSUBISHI PLCs {FXON} I did have 'GX Developer' and {FXGP -WIN-E}' installed on my system and I did have the required bus adaptor with RS232 both 9 and 25 pin which matches the ports on my system.
I connected the MITSUBISHI plcs appropiately with my laptop and power up the plcs with single phase as required, the power LED on the plcs comes up to say its being powerd and some LED from the out put indicator also comes up.
First I try using the GX Developer... I select the PLCs type that matches my PLCs and I click on the tool bar {online} then I select Read from ROM but it could Read keep say can not read from ROM.
pls help.
Looking forward to hearing from you.
I connected the MITSUBISHI plcs appropiately with my laptop and power up the plcs with single phase as required, the power LED on the plcs comes up to say its being powerd and some LED from the out put indicator also comes up.
First I try using the GX Developer... I select the PLCs type that matches my PLCs and I click on the tool bar {online} then I select Read from ROM but it could Read keep say can not read from ROM.
pls help.
Looking forward to hearing from you.