Hi guys. I have some problem.I want to use AB PLC Control YASKAWA servo motor through MP3300 EtherNet/IP Communication Module.
Now I download yaskawa EtherNet/IP EDS File
can not add new module in rslogix5000
"at least one connection must be configured for this device"
Images:
https://drive.google.com/open?id=1bEz1YNAN6qYgG5GknA84uptEP6N2WOVI
EDS 1 file:(Yaskawa america 5k)
https://drive.google.com/open?id=1qlCCrTpJyAJVOYhGqT6z0IxBrrmfe3XC
EDS 2 file:(Yaskawa Japan 10k)
https://drive.google.com/open?id=1gZ5oUo03Ut5mrAMtHcQKLrr-u04b7V3f
How should I do it?
Does anyone have an example?
PLC(Master):
CompactLogix 1769-L30ER
MP3300:
Power Supply & Base Unit Rack:JEPMC-BU3304-E MBU-304
Controller CPU Module:JAPMC-CP3301-1-E CPU-301 (16 axes)
EtherNet/IP Communication Module:JAPMC-CM2304-E 263IF-01
Now I download yaskawa EtherNet/IP EDS File
can not add new module in rslogix5000
"at least one connection must be configured for this device"
Images:
https://drive.google.com/open?id=1bEz1YNAN6qYgG5GknA84uptEP6N2WOVI
EDS 1 file:(Yaskawa america 5k)
https://drive.google.com/open?id=1qlCCrTpJyAJVOYhGqT6z0IxBrrmfe3XC
EDS 2 file:(Yaskawa Japan 10k)
https://drive.google.com/open?id=1gZ5oUo03Ut5mrAMtHcQKLrr-u04b7V3f
How should I do it?
Does anyone have an example?
PLC(Master):
CompactLogix 1769-L30ER
MP3300:
Power Supply & Base Unit Rack:JEPMC-BU3304-E MBU-304
Controller CPU Module:JAPMC-CP3301-1-E CPU-301 (16 axes)
EtherNet/IP Communication Module:JAPMC-CM2304-E 263IF-01