Crimson 3.0 help

Hello all,
Hope you are doing well.
I am a beginer in working with crimson 3.0 sofware for HMI programming. I have surfed for its tutorial but I am not getting it properly. Pleaae can any one help me with stepwise guidence for working with crimson, atleast till making a simple program.
Thank you in advance.

What is your intended usage? Or if you don't have one, can you tell us about what parts you are not understanding?

There are some Red Lion official tutorials here:
http://www.redlion.net/support/red-lion-documentation/tutorials-presentations

And here:
https://www.youtube.com/watch?v=64IHaKdLqLs&list=PLwpegUZv5VFcBBn2qTtYMJj18-y_kMGQe

There is a quick start guide here, and the full Manual takes you through the various stages:
http://www.redlion.net/crimson-30


Then also on YouTube JoWazoo covers a lot more than the Redlion videos, he doesn't get everything right, but it will get you along:
https://www.youtube.com/user/JoeWaZoo1/videos