micrologix 1400 to mitsubishi gs2107 hmi communicattion

Similar Topics

J
Micrologix 1400 & Mitsubishi D700-SC
Hello everyone, i want to connect these 3 devices: 1. Micrologix 1400 2. Mitsubishi Inverter D700-SC 3. Simple laptop or PC So, my VFD only...
Replies
1
Views
2,017
gclshortt
gclshortt
C
MicroLogix 1400 reading and writing to a Mitsubishi A8NEIP-2P
I am new to this. I have a customer wanting to use a MicroLogix 1400 to control a Mitsubishi A8NEIP-2P. All I can find on the Mitsubishi site is...
Replies
2
Views
2,231
CatfishMan
C
F
Controlling a Mitsubishi VFD with a Micrologix 1400 via Modbus - at a loss.
So, here's my hardware: Micrologix 1400 controller Mitsubishi E740 Drive I'm communicating via the 1763-NC01 out of Channel 0 on the Micrologix...
Replies
10
Views
4,916
PrasannaMadival
P
F
Micrologix 1400 - Modbus communication to multiple Mitsubishi Drives
My main question is what hardware do I need to make the connections. Is a 1761-NET-AIC module required? I'm going to use channel 2 (the 9-pin...
Replies
2
Views
2,836
FactoryTalktotheHand
F
C
MSG instruction connect failure between ControlLogix5572 and MicroLogix 1400.
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Replies
0
Views
17
Chris3EC
C
Back
Top Bottom