Im a university student and for my project i had to make up a subject. Something that has really interested me is remote maintanance of PLCs. so heres the question.
IF i have a mitsubishi FX 1N with a RS 232 DB card and a DIN rail mounted modem and on the pc side i have a modem and GX developer, can i access the plc and run gx developer. or any diagnostic program.
i have been told i may need to use an opc server and get drivers. Im not sure what they mean as they did not explain why or how they worked or why you needed them. So im kind at a loss what to do.
Any information would be brilliant.
Thanks everyone
James
IF i have a mitsubishi FX 1N with a RS 232 DB card and a DIN rail mounted modem and on the pc side i have a modem and GX developer, can i access the plc and run gx developer. or any diagnostic program.
i have been told i may need to use an opc server and get drivers. Im not sure what they mean as they did not explain why or how they worked or why you needed them. So im kind at a loss what to do.
Any information would be brilliant.
Thanks everyone
James