FlexLogix and Maple Systems

Don_Dubé

Member
Join Date
Jul 2004
Location
Massachusetts
Posts
25
My FlexLogix and Maple Systems (HMI 520C Silver serie) will not communicate using the DF1 protocol.

Maple Systems only tested it with the ControlLogix but to me it should not matter whiich PLCs we are using if we are using the same protocol but I could be wrong so I am wondering if those can actually work together?

Thanks

Don
 

Similar Topics

I'm going to rephrase this question. I have a 1794-L34 controller i need to replace. Is there a better way to do this than to put in a 1769-L30ER...
Replies
6
Views
635
Hi, i've write this AOI to send a ControlValue comes from pid and control a valve. this valve is controlled through analog output. the rang of...
Replies
0
Views
1,008
One of our systems runs on a FlexLogix 1794-L34 processor with a 1788-ENBT for plant network access and a 1788-CNC for remote I/O. The current...
Replies
3
Views
1,523
Hi guys i have a flexlogix 5434 with 1788-enbt. On the processor is a sticker with IP 10.24.230.239 but i have no idea if that's correct. I...
Replies
6
Views
2,172
Back
Top Bottom