passwordg
Member
The PLC is a Siemens CPU317-2 PN/DP
We know it needs Step7 software, not TIA portal, but that is all we know for now.
What other information do we need from the programmers:
IP addresses ?
PLC Firmware version, Step7 version ?
Profinet version ??
etc ?
What would be the file extensions for the PLC file and the WinCC HMI ?
Thank you!
We know it needs Step7 software, not TIA portal, but that is all we know for now.
What other information do we need from the programmers:
IP addresses ?
PLC Firmware version, Step7 version ?
Profinet version ??
etc ?
What would be the file extensions for the PLC file and the WinCC HMI ?
Thank you!
Last edited: