Just wanted to share "Private Network"

It's called a VPN vestural private network
and if you want to take to the next level the can get an encrypted VPN

The IT guys don't want to use them because they have to do a little work to set them up. They don't want others to know about their magic smoke.

The best way to lock it down is to establish a VPN that will only allow a connection from a know IP address preferably tunneling out of the clients site to the vendors Static IP address. Monitor the ports accessed during a week of service then lock all of the others down.
I still think that is about as solid as it gets.

I have one client that was so nervous that we had to install two ethernet to serial bridges to enact with any part of the network that was touched by the clients ERP
 

Similar Topics

I'm using raspberry pi 4b to poll 3 different plcs with modbus tcp and then publish the tag data using mqtt sparkplug b back to my Ignition...
Replies
15
Views
3,443
Hello, I'm struggling with getting an email to send using an eweb module on a controllogix system. Any chance I could get someone here to help?
Replies
4
Views
1,849
Greetings to all ... I've never owned or needed a household generator – but current conditions have convinced me that now's the time to buy one...
Replies
23
Views
6,840
With the Automation Directs Open Source Arduino Compatible PLC and the Open plc Project, plus all the Raspberry Pi HMI's, what are your opinions...
Replies
12
Views
4,298
Attention all PLCs.net members!! As Covid-19 has put many of us factory automation folks out of work, let’s work together to help get as many of...
Replies
18
Views
19,522
Back
Top Bottom