Derman0524
Member
Hi there,
I'm having major issues in connecting a Siemens S7-300 315 with an ET200S through Profibus.
I've tried many methods but I'm really not sure if they are even right or if my wiring makes sense. I have a Profibus cable running from 315 to my ET200S but a main issue I'm having is through my hardware config.
Attached are some photos but I think my communications are set up properly but any help would be great on how to get this properly sorted.
I'm connected to the 315 from my laptop via MPI.
Any help would be great.
Thanks,
Lucas
I'm having major issues in connecting a Siemens S7-300 315 with an ET200S through Profibus.
I've tried many methods but I'm really not sure if they are even right or if my wiring makes sense. I have a Profibus cable running from 315 to my ET200S but a main issue I'm having is through my hardware config.
Attached are some photos but I think my communications are set up properly but any help would be great on how to get this properly sorted.
I'm connected to the 315 from my laptop via MPI.
Any help would be great.
Thanks,
Lucas