AB2005 Member A Join Date Nov 2006 Location Lahore Posts 318 Jan 19, 2019 #1 Hi; Is it possible to configure two SLC 5/05 in RS View32 via TCP/IP and Direct Driver? Communication is slow if we configure two PLCs via OPC server.
Hi; Is it possible to configure two SLC 5/05 in RS View32 via TCP/IP and Direct Driver? Communication is slow if we configure two PLCs via OPC server.
sparkie Lifetime Supporting Member S Join Date Nov 2014 Location KS Posts 1,148 Jan 19, 2019 #2 I don't see why you couldn't set this up in RSLinx enterprise. I'm thinking RSView32 is a very old version of the software, so I'm not sure. It was before my time.
I don't see why you couldn't set this up in RSLinx enterprise. I'm thinking RSView32 is a very old version of the software, so I'm not sure. It was before my time.
Ken Roach Lifetime Supporting Member + Moderator Join Date Apr 2002 Location Seattle, WA Posts 17,482 Jan 19, 2019 #3 RSView32 support four "direct driver" channels. RSLinx Classic is still the data server, but without the OPC layer. Can you put a number on what you consider to be "slow" communications ? Is it faster if you have just one SLC-5/05 configured ?
RSView32 support four "direct driver" channels. RSLinx Classic is still the data server, but without the OPC layer. Can you put a number on what you consider to be "slow" communications ? Is it faster if you have just one SLC-5/05 configured ?