taylor1982
Member
Hi all,
I have a 100hp torque motor running on a Powerflex 755 drive. The motor is coupled to a drum which is accellerated and decellerated.
The problem now is, that the drum start to vibrate when the drive is enabled and get set speed = 0. This happens not every time and when you turn the drum manually just a bit then the vibrate is gone.
Has anybody hints what could avoid this vibrations? I did the Autotune with the drive an all other functions are fine.
Thank you
Steve
I have a 100hp torque motor running on a Powerflex 755 drive. The motor is coupled to a drum which is accellerated and decellerated.
The problem now is, that the drum start to vibrate when the drive is enabled and get set speed = 0. This happens not every time and when you turn the drum manually just a bit then the vibrate is gone.
Has anybody hints what could avoid this vibrations? I did the Autotune with the drive an all other functions are fine.
Thank you
Steve